TMCT17 Carbide Micrograin 2-Flute End Mills with 4mm Shank Dia - for Aluminum & Brass
Specifications
SKU: TMCT17 Carbide Micrograin 2-Flute End Mills with 4mm Shank Dia - for Aluminum & Brass
Carbide Micrograin 2-Flute End Mills with 4mm Shank Dia - for Aluminum & Brass
- Single cut center.
- 45° helix angle.
- Unique arc gap design.
- Suitable for processing aluminum alloy, copper magnesium alloy, high toughness material.
- Smooth cutting edge, fast chip flow, high precision, long service life, the best choice for high speed processing.
Order Code TMCT17 |
Dia. (mm) |
Flute L. (mm) |
Shank Dia. (mm) |
Overall L. (mm) |
-20100C | 1.0 | 3 | 4 | 50 |
-20100D | 1.0 | 3 | 6 | 50 |
-20150C | 1.5 | 5 | 4 | 50 |
-20150D | 1.5 | 5 | 6 | 50 |
-20200C | 2.0 | 6 | 4 | 50 |
-20200D | 2.0 | 6 | 6 | 50 |
-20250C | 2.5 | 8 | 4 | 50 |
-20250D | 2.5 | 8 | 6 | 50 |
-20300C | 3.0 | 9 | 4 | 50 |
-20300D | 3.0 | 9 | 6 | 50 |
-20350C | 3.5 | 11 | 4 | 50 |
-20400C | 4.0 | 12 | 4 | 50 |
-20400D | 4.0 | 12 | 6 | 50 |
-20450C | 4.5 | 14 | 6 | 50 |
-20500C | 5.0 | 15 | 6 | 50 |
-20550C | 5.5 | 17 | 6 | 50 |
-20600C | 6.0 | 18 | 6 | 50 |
-20800C | 8.0 | 24 | 8 | 60 |
-21000C | 10.0 | 30 | 10 | 75 |
-21200C | 12.0 | 34 | 12 | 75 |
-21600C | 16 | 48 | 16 | 100 |
-22000C | 20.0 | 50 | 20 | 100 |
TMCT17 Carbide Micrograin 2-Flute End Mills with 4mm Shank Dia - for Aluminum & Brass