Dual-use Coating Thickness Tester for Ferrous & Non Ferrous Metals

Dual-use Coating Thickness Tester for Ferrous & Non Ferrous Metals

Dual-use Coating Thickness Tester for Ferrous & Non Ferrous Metals

Applications:
  • Widely used in manufacturing, metal processing industry, chemical industry, commodity inspection and other testing areas.
  • Magnetic Induction (Ferrous): Measurement of non-ferromagnetic coatings on ferromagnetic metal substrates such as steel and iron. Coatings such as lacquer, powder, plastic, rubber, synthetic materials, phosphating layers, chromium, zinc, lead, aluminum, tin , cadmium, porcelain, enamel, oxide and so on.
  • Eddy Current Principle (Non-Ferrous): Measurement of the enamel, rubber, paint, plastic layer on the copper, aluminum, zinc, tin substrates.

Product description:
  • Can store 99 sets of measurement data.
  • Iron-based and non-ferrous coating thickness gauge.
  • With Single and Continuous two kinds of measurement options.
  • Metric / Imperial units conversion.
  • With Manual/Auto shutdown and undervoltage indication functions.
  • Automatically remember the calibration value and automatically identify the material of the substrate under test.
  • Buzzer beeps during operation, the buzzer does not sound during continuous measurement.
  • USB data cable output, RS-232C data cable and software connect with the PC.
  • Split type, providing a variety of probes, high mobility.

Product parameters:
  • Measurement method: F Magnetic Induction / NF Eddy Current
  • Measuring range: 0 ~ 1250μm / 0 ~ 50mils (standard range)
  • Resolution: 0.1μm / 1μm
  • Minimum surface: F: convex 1.5mm / concave 25mm
  •                              N: convex 3mm / concave 50mm
  • Minimum measurement width: 6mm
  • Basic critical thickness: 0.3mm ((11.81mils)
  • Accuracy: ± 1 ~ 3% n or ± 2.5μm
  • Low voltage indication
  • Working conditions: temperature: 0 ~ 40 ° C, humidity: 10 ~ 90% RH
  • Power: 2 x AAA batteries
  • Size: 126 x 65 x 35mm
  • Weight: 81g (without battery)

Standard accessories:
  • 1 x Coating Thickness Tester
  • 1 x Iron base reference block
  • 1 x Aluminum base reference block
  • 1 x set (4) Calibration diaphragm
  • 1 x Measurement sensor
  • 1 x Portable box
  • 1 x Operation Manual

Optional accessories:
  • RS232 or USB online cable and software
  • Bluetooth devices and software
 
Order Code
TMMU30
Measuring Range
-01001D 0~1250μm / 0~50mil


Dual-use Coating Thickness Tester for Ferrous & Non Ferrous Metals

Fill out the form below and we'll be in touch soon.

Related Products